Second-Hand Machines

12951 HENRICH rod breakdown drawing line

up to now used for: Cu
no. of wires: 2
no. of drafts: 15
inlet wire Ø max: 8 mm
finished wire Ø min: 1,1 mm

HENRICH wire rod pay off tower
HENRICH wire rod pay off tower
HENRICH ES-2 continuous annealer
- annealing capacity: 1060 kVA
HENRICH Control pulleys accumulator
HENRICH Control pulleys accumulator
HENRICH 4B 1250 0-2 bundle packer
HENRICH 4B 1250 0-2 bundle packer
spool transport system
HENRICH electrical cabinet

12945 NIEHOFF SV 400 NPS spool rewinding line

up to now used for: Stranded wires, insulated 0.22 - 6.00 mm²
cable Ø: 5 mm
spool flange Ø max: 400 mm
speed max: 400 m/min
additional data: NPS-Spule 400/400
d min= 176 mm
d max = 392 mm
n max = 723 U/min

NPS-Spule 400/250
d min = 208 mm
d max = 392 mm
n max = 612 U/min

NPS-Spule 400/150
d min = 229 mm
d max = 392 mm
n max = 556 U/min

NPS-Spule 400/100
d min = 239 mm
d max = 392 mm
n max = 532 U/min

NIEHOFF brake
NIEHOFF Control pulleys accumulator
NIEHOFF electrical cabinet

12940 NIEHAUS SR 6/250 tubular strander

up to now used for: high carbon steel wire
spool flange Ø max: 250 mm
lay length max: 50 mm
type of stranding tube bearing: bearing

NIEHAUS double haul-off capstan
NIEHAUS take-up
NIEHAUS electrical cabinet

12939 ALBERT overhead typ drawing line

no. of drafts: 5
technical condition: Electrics renewed
inlet wire Ø max: 6,5 mm
number of blocks: 3
additional data: The line consists of:
Block No.1: Number of drafts 2
Block No.2: Number of drafts 2
Block No.3: Number of drafts 1
The finished product is wound onto the stripper capstan of block number 3.

ALBERT double drawing block
- up to now used for: low carbon wire
- drawing capstan Ø: 600 mm
- drawing capstan Ø 1. die: 440 mm
- drawing capstan Ø 2. die: 600 mm
- no. of drafts: 2
ALBERT double drawing block
- up to now used for: low carbon wire
- drawing capstan Ø: 600 mm
- drawing capstan Ø 1. die: 440 mm
- drawing capstan Ø 2. die: 600 mm
- no. of drafts: 2
ALBERT single drawing block
- up to now used for: low carbon wire
- drawing capstan Ø: 600 mm
- no. of drafts: 1
- type of motor: AC motor
- motor power: 28 kW

12938 stretching line with inline straightening and cutting machine

up to now used for: hot and cold rolled wires
suitable for: Line for stretching hot and cold rolled material with up to approx. 6% with inline straightening and cutting machine to produce bars from wire rod coil.
Line consists of: Wire rod pay-off, stretching unit with wire transport, controlled wire pull-out with loop and inline straightening and cut-off machine for bars.
finished wire Ø max: 12 mm

GSG ÜKA-2 pay off tower with two pay off beams
descaling / stretching unit
Roller feeding unit
WAFIOS R 51 wire straightening and cutting machine
- up to now used for: Warm und kaltgewaltes Material
- wire Ø min: 5,6 mm
- wire Ø max: 14 mm
- outlet table length: 14000 mm

12937 STRECKER 2 B butt welding machine

up to now used for: low carbon wire
wire Ø min: 5 mm
wire Ø max: 14 mm
total connected load: 20 kVA

12933 STRECKER 2 B butt welding machine

up to now used for: low carbon wire
wire Ø min: 5 mm
wire Ø max: 14 mm
total connected load: 20 kVA
post-annealing facility: existent

12932 descaling / stretching unit

up to now used for: hot and cold rolled wires
wire Ø max: 14 mm
no. of flattening rolls: 10
additional data: with wire string in transport
with descaling screw

12918 IMPIANTI INDUSTRIALI 1047375 dry powder coating

suitable for: The wire coater serves for the surface lubrication of the descaled and cleaned wire before the rolling
procedure.
wire Ø min: 5,5 mm
wire Ø max: 14 mm

12916 BOXY BOSCO GHIERA Z 2 spool

spool flange Ø: 760 mm
spool core Ø: 355 mm
spool useful width: 280 mm
total spool width: 360 mm
spool bore Ø: 60 mm

12915 KOCH KSS 1250 W spooler

up to now used for: low carbon and high carbon steel wire
suitable for: spooling of wires on spools in clockwise direction
spool flange Ø max: 1250 mm
speed max: 20 m/s
additional data: Previously used for winding high-carbon steel wires behind a drawing machine in the size range 0.6 mm - 1.40 mm.

12908 M + E NMG25 + SP380 fine wire drawing machine

up to now used for: patented and brass coated high carbon steel wire with 0,9% C
no. of drafts: 25 (24 are installed)
inlet wire Ø max: 1,4 mm
finished wire Ø max: 0,25 mm
finished wire Ø min: 0,08 mm

M + E SP 380 single spooler

12906 M + E NMG25 + SP380 fine wire drawing machine

up to now used for: patented and brass coated high carbon steel wire with 0,9% C
no. of drafts: 25 (24 are installed)
inlet wire Ø max: 1,4 mm
finished wire Ø max: 0,25 mm
finished wire Ø min: 0,08 mm

M + E SP 380 single spooler

12904 M + E NMG25 + SP380 fine wire drawing machine

up to now used for: patented and brass coated high carbon steel wire with 0,9% C
no. of drafts: 25 (24 are installed)
inlet wire Ø max: 1,4 mm
finished wire Ø max: 0,25 mm
finished wire Ø min: 0,08 mm

M + E SP 380 single spooler

12902 M + E NMG25 + SP380 fine wire drawing machine

up to now used for: patented and brass coated high carbon steel wire with 0,9% C
no. of drafts: 25 (24 are installed)
inlet wire Ø max: 1,4 mm
finished wire Ø max: 0,25 mm
finished wire Ø min: 0,08 mm

M + E SP 380 single spooler

12900 M + E NMG25 + SP380 fine wire drawing machine

up to now used for: patented and brass coated high carbon steel wire with 0,9% C
no. of drafts: 25 (24 are installed)
inlet wire Ø max: 1,4 mm
finished wire Ø max: 0,25 mm
finished wire Ø min: 0,08 mm

M + E SP 380 single spooler

12898 M + E NMG25 + SP380 fine wire drawing machine

up to now used for: patented and brass coated high carbon steel wire with 0,9% C
no. of drafts: 25 (24 are installed)
inlet wire Ø max: 1,4 mm
finished wire Ø max: 0,25 mm
finished wire Ø min: 0,08 mm

M + E SP 380 single spooler

12896 M + E NMG25 + SP380 fine wire drawing machine

up to now used for: patented and brass coated high carbon steel wire with 0,9% C
no. of drafts: 25 (24 are installed)
inlet wire Ø max: 1,4 mm
finished wire Ø max: 0,25 mm
finished wire Ø min: 0,08 mm

M + E SP 380 single spooler

12894 M + E NMG25 + SP380 fine wire drawing machine

up to now used for: patented and brass coated high carbon steel wire with 0,9% C
no. of drafts: 25 (24 are installed)
inlet wire Ø max: 1,4 mm
finished wire Ø max: 0,25 mm
finished wire Ø min: 0,08 mm

M + E SP 380 single spooler

12886 SAMP BM 630 DB double twist bunching machine

twists per minute: 6000
take-up spool flange Ø: 630 / 400 mm
cross section of core max: 6 mm²
lay length max: 62,98 mm
speed max: 300 m/min

SAMP electrical cabinet